Beneteau First 27 SE

Steckbrief für Beneteau First 27 SE

TypRegattaboot
ModellFirst 27 SE
Gebraucht/NeuGebrauchtboot
PreisEUR 80.000,- inkl. MwSt.
SteuerungKielschwert
MaterialKunststoff GFK
StandortMuggia, Trieste, Italien
PDF-DownloadHerunterladen

Abmessungen

Länge7.99
Breite2.54
Tiefgang0.95
Gewicht1550

Motor

HerstellerTohatsu 9,9HP outboard
TreibstoffBenzin

Bemerkung

Privately owned, lightly used 2021 First 27 SE with a very high specification including B&G instruments, carbon rig and full suit of Olympic carbon sails.

FURTHER BROKER’S COMMENTS:

Samuel Manuard-designed high-performance cruising yacht with interiors by Sito and engineering and construction by Beneteau Group-owned Seascape. The First 27 SE was conceived by Andraz Mihelin and his Seascape team to blend their Mini Transat offshore-experience with a bigger, cruising-capable, trailer-ready fast sailboat which should be prone to winning races. Over 150 units were delivered, making it one of the most successful models in the Beneteau lineup.

Lightly used, and still under her original private ownership, NOUER 2 is a ready-to-go and very well equipped example and offered for sale at a very competitive price. Her specification highlights include:-
Carbon fibre mast and boom
Retractable carbon fibre bowsprit
Olympic Sails carbon square-top mainsail and full sail wardrobe
Harken winches
Variable draft centreboard manually operated
Tohatsu 9.9hp outboard engine
Twin rudders with carbon fibre tiller
B&G instrument package
Turchese comfort pack
Fresh water tank
Black water tank
Solar panel
Marine heads
Dyneema running rigging
12vDC socket
Cradle
Winter cover for boat, mast and boom

MANUFACTURER’S COMMENTS:

Planing at double-digit speeds is easier than ever. First 27 promises a thrilling and pure sailing experience. She is sourcing her performance from a modern hull design and light but stiff vacuum-infused hull construction. Hull with very high initial stability and deep lead-bulb keel easily handle carbon rig with large square-top mainsail without a backstay or runners. All the power is nothing if you can't manage it. Well-thought cockpit ergonomy, no runners, balanced twin-rudder steering system all empower the sailors. No matter if you're sailing solo, double-handed or fully crewed, First 27 SE will reward you with an astonishing sailing experience and pure joy under the sails.

First 27 SE is the only B category trailable 8m boat on the market with a fully functional interior. What might look minimalistic is the extremely weight-sensitive interior, where all components are also functioning as part of the boat structure. She can accommodate up to 6 adults, two in separated bow cabin, and 4 in the saloon. Thanks to innovative magnetic doors, the mid-section of the boat can be converted to the proper marine toilette, front cabin extension or "wet-room" for sail-changes. Interior also offers crew bags for personal belongings, fridge, foldable table and sail-locker. Combined with other practicalities, these make her an ultimate adventure cruiser for sailing connoisseurs. All interior is modular, so one can quickly empty it and reduce weight for racing needs.


SPECIFICATIONS
CONSTRUCTION

RCD Status:
Our understanding is that the boat comfort with the CE Conformity Class B for 6 crew, Class C for 8 crew Class D for 8 crew.

Hull Construction:
Hull and deck constructed with Vacuum Infusion of Vinyl ester resin, foam and Soric GRP sandwich with unidirectional and biaxial laminates
Hull is reinforced with Infused GRP stringers in the keel and bow sections
Hull and deck are moulded in single tone off-white
Deck with high traction non-skid moulded
Carbon fibre beams laminated on keel box and glued to the deck to support mast compression and keel hydraulic ram
Red chainplates bolted to the main structural bulkhead
Bolts, screws and fittings are all made of stainless marine grade stainless steel
Faired underwater areas, ready for sanding, epoxy primer and antifouling application

Keel & Rudder:
Swinging keel with “elephant leg” lead bulb, main steel structural element and epoxy GRP enclosure
Laminated areas of the keel are pre-painted with epoxy primer for easier antifouling treatment
Manually operated hydraulic pump with stainless steel hydraulic ram built in the carbon fibre mast support

MACHINERY

Engine & gearbox:
Tohatsu 9,9HP, four strokes, petrol engine, two cylinders, water cooled outboard engine
Throttle and gear remote control system with Teleflex commands,
Electric starter with key
6 A alternator for charging of the battery
Custom installation parts (engine foot rubber support, storage position padding)
Standard Mercury 12 L fuel tank with connection hose
Strap with attachment points for fixation

Service & Maintenance:
Date of last engine service – 2025

Propulsion & Steering:
Two transoms hung balanced rudders, built of GRP foam sandwich
Folding outboard engine in the cockpit engine locker with inspection from the deck

ELECTRIAL SYSTEMS

Voltage systems:
12vDC primary domestic system with 12vDC starting circuit
12vDC socket

Battery Banks:
1x 12vDC 52Amp engine start battery

Alternators:
Engine mounted 6Amp alternator

PLUMBING & GAS SYSTEMS

Fresh Water:
12V water pressure pump with the control switch on the electric panel
Shower handle with housing on the stern, next to the bathing ladder

Bilge Pumps:
Manual bilge pump operated from the cockpit

TANKAGE

Fuel:
12 litres fuel tank

Fresh Water:
Flexible 55 L / 14,5 gallons water tank, placed in storage behind the icebox

Holding Tanks:
Black water tank

NAVIGATION & COMMUNICATION EQUIPMENT

Navigation:
B&G Triton2 digital display multi-purpose 4.1inch sailing instrument and autopilot
B&G WS320 Wireless Wind Sensor
B&G ZG100 GPS antenna with compass
NMEA wirings and cables

DOMESTIC EQUIPMENT

Heads:
Marine manual heads

ACCOMMODATION


Accommodation Summary:
Six berths in one double cabin forward and four saloon settee berths.
Interior design by Sito

Accommodation layout from Forward:

Accommodation Finish:
Bulkheads and furniture lightly covered with mat paint with white gel coat on the moulded parts for light, clean and low maintenance finish

Accommodation layout from Forward:

Forward Cabin:
Double V-berth with insubmersibility volume underneath
Opening hatch of 25,5 cm x 25,5 cm / 10 x 10 inch for front cabin ventilation
Mid-section compartment / Wet room

Heads Compartment:
An opening hatch of 58 cm x 58 cm / 23 x 23 inch for light ventilation and deck access to the mid-section compartment
The base for chemical or flush toilette with monolithic reinforcements for valves on the starboard side

Saloon:
Bright and spacious saloon area with large Plexiglass companionway washboard and sliding hatch
Dedicated storage place for washboard back of the companionway steps
Benches on both sides of the saloon, divided into four wooden covers of the storage space underneath
Main electric box and battery in aft port compartment and keel hydraulic pump under aft starboard compartment
Padded back-supports with gimbal cooker holder attachment points on both sides and storage behind the nets
Wide berths in the stern on both sides, with insubmersiblity chambers underneath
Front and aft keel box covers with table attachment point with a screw on the aft
Electric boxes under the ceiling and under the companionway
Extra storage room under the companionway and engine box for fresh-water tank or other systems, with cover
Two ergonomically shaped wooden companionway steps
Well insulated 40L icebox below bottom companionway step, with fridge compressor upgrade possibility
Light grey EVA foam floorboards
Shrouds attachments counter plates painted in mat red

DECK EQUIPMENT


Rig:
CompoTech mast and boom with two sets of swept-back spreaders build in high-quality carbon fibre
Ronstan Series 19 aluminium track for mainsail cars
All carbon parts UV protected
Continuous 1x19 standing rigging
Retractable carbon bowsprit controlled from the cockpit
Dyneema pole-out control line
Dyneema gennaker tackline
2:1 Dyneema mainsail halyard with Wichard MX8 halyard shackle
Dyneema jib halyard
2:1 Dyneema staysail halyard
Dyneema masthead gennaker halyard
Dyneema fractional gennaker halyard
9x Spinlock clutches for halyards, mainsail reefs and bowsprit
control lines
Ronstan blocks and cleats for the mainsail, jibs and gennakers control lines
One tapered mainsheet with ball bearing low friction blocks
Three mainsail reef lines
Control line for the mainsail traveller
8:1 outhaul purchase led inside the boom
8:1 cunningham purchase
16:1 vang purchase
Spliced Dyneema jib inhaulers with a fixed length
2:1 jib downhaulers with control lines, cleats and blocks
Two tapered gennaker sheets with blocks
Genoa and Code0 Karver furler


Winches:
4x Harken self-tailing two speed winches

Sails:
Olympic Sails carbon fibre square top main sail 1 reef
Olympic sails light jib
Olympic Sails medium jib
Olympic Sails Furling genoa
Olympic Sails furling Code0
Olympic Sails fractional asymmetric furling gennaker cableless (black)
Olympic Sails asymmetric masthead gennaker (red)

General:
Bathing ladder
Aft shower
Lazy bag
Lazu jack

Covers, Cushions & Canvas:
Mast transport & storage bag
Boat winter cover
Hauling cable
Cradle

SAFETY EQUIPMENT:

General note on safety equipment: Any safety equipment such as liferafts, Epirbs, fire extinguishers and flares etc. are usually personal to the current owner(s) and if being left on-board as part of the sale of a used vessel may require routine servicing, replacement, or changing to meet a new owners specific needs.


VIEWING ARRANGEMENTS
Lying Muggia, Trieste, Italy.

Available to view strictly by appointment

Office Hours Mon- Fri 0900 – 17.00
Saturday by prior appointment

For more information or to arrange a viewing please contact us.

Please Note: Due to the varying locations of our yachts, your travel time and the distances that may be involved, we recommend that you only make arrangements to view if you are actively considering purchase.

Lead Broker: Michele Antonini – Grabau International (Italia)
Tel: +39 333 74 89 281
Email: ######@grabauinternational.com

Verkäufer kontaktieren